ECS Tuning: 1.8T Coil Pack Ignition (Stage 1-3) DIY

www.ecstuning.com Includes four OEM Volksagen / Audi Hitachi “E” style coil packs, stainless securing bolts, OEM wiring harness heat shield & a set of NGK spark plugs. This ECS Stage III Ignition solution converts your troublesome & hard to get Bremi brand coil packs (oem part # 06B 905 115L or R) with the more durable Hitachi brand coil pack. Over the years the Hitachi has shown to be much more durable than the Bremi’s along with being able to be secured to the valve cover with 2 allen headed bolts. This ECS stage III ignition solution kit includes the following: – Four OEM “E” version Hitachi coil packs – 8 stainless securing screws & washers – OEM wiring harness heat shield – 4 NGK spark plugs (PFR6Q) – O-rings for sealing new coil packs to cylinder head This tutorial is provided as a courtesy by ECS Tuning. Proper service and repair procedures are vital to the safe, reliable operation of all motor vehicles as well as the personal safety of those performing the repairs. Standard safety procedures and precautions (including use of safety goggles and proper tools and equipment) should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety. Although this material has been prepared with the intent to provide reliable information, no warranty (express or implied) is made as to its accuracy or completeness. Neither is any liability assumed for loss or damage resulting from reliance
Video Rating: 4 / 5

25 Responses to ECS Tuning: 1.8T Coil Pack Ignition (Stage 1-3) DIY

Leave a Reply

Your email address will not be published. Required fields are marked *

*

* Copy This Password *

* Type Or Paste Password Here *

HTML tags and attributes are not allowed.